Sealmaster is a division of  Dixon International Group Limited

Telephone: 01223 832851    Contact Us

Sealmaster Butt-Jointed Fire Glazing System

Sealmaster is a division of  Dixon International Group Limited

Telephone: 01223 832851    Contact Us

Butt-Jointed Fire Glazing System


BENEFITS

Fully-glazed partition walls. Unlimited runs of fire safety glass. No mullions or heavy frames.

FEATURES
The butt-jointed system has a 30 minute fire integrity rating (BS 476: Part 22) using panels in any size up to 3 by 1.6 metres. Unlimited runs can be fixed into untreated timber (or steel) perimeter frame. Quick and easy to install, the FireGlaze Compound and G30 bead strip are water-based and erosion-resistant.

OPTIONS
FireGlaze Compound is available in grey, white, light oak and brown colours for a seamless match with glass andperimeter frame.

COMPONENTS
The butt-joints are pointed with FireGlaze Compound. These may be covered with an optional trim (max 25mm x 3mm). Sealmaster self-adhesive G30 bead strip (white) is used around the perimeter frame, between the beads and glass. Alternatively, FireGlaze Compound (white, grey, light oak or brown) may be used..

INSTALLATION
FireGlaze Compound is applied by skeleton gun to form discrete vertical butt joints. It is supplied in 310 ml cartridges providing , for example, approximately 12 linear metres of 6mm bead. Easy to follow, illustrated instructions are provided. Sealmaster can recommend experienced installers and trains interested contractors - without charge.

TEST EVIDENCE
FireGlaze Compound and G30 bead strip have been proven in independent BS 476: Part 22 tests and the butt-jointed system has also been assessed by the Warrington Fire Research Centre. Test reports and product approvals are available for inspection on request.

IMPORTANT NOTE
No substitution of materials may be permitted. For further information and advice, please contact Sealmaster.

 

butt-jointed glazing

  • Sealmaster Butt-Jointed Fire Glazing System

resources